Excavation & Septic Installation in Firth, ID

New home excavation and septic installation near Firth in Bingham County.

Excavation and Septic Installation Near Firth, ID

Firth is a small town in Bingham County, on the Snake River Plain. Spring Creek Builds provides septic installation and replacement, plus excavation for new homes, for customers in the Firth area and throughout Bingham County.

Firth is rural farm country, where new homes on acreage typically need their own well and septic system. Bingham County is a large county on the Snake River Plain, with Blackfoot as the county seat. It is mostly farm and ranch ground, with plenty of rural parcels where a home needs its own well and septic system.

Skid steer beside a long trench with PVC pipe at golden hour

Our Services Near Firth

If your property is in or near Firth, here is what we can do for you.

Septic System Installation in the Firth area

A new septic system is a core part of what we do. In the Firth area, an install starts with test holes, moves to the local health district's evaluation and permit, and ends with our crew installing the system to the approved plan.

Septic System Replacement in the Firth area

When a septic system in the Firth area has failed, replacement is handled like a new install: test holes, the health district's evaluation, a permit, and then the dig and installation of the new system.

Septic Repair in the Firth area

We take on larger septic repairs in the Firth area, where there is real excavation and system work to do. We tell you what failed and what it takes to fix, including when a replacement is the better answer.

New Construction Excavation in the Firth area

New home excavation is the work we do most. In the Firth area, we work with general contractors, developers, and homeowners, and we handle the dirt work from the first site walk through backfill.

Foundation Site Prep in the Firth area

Foundation excavation in the Firth area starts with the surveyed foundation points. We dig to those points, leave the site ready for the concrete crew, and backfill once the foundation and utilities are in.

Grading & Driveways in the Firth area

Grading is something we do a lot of. In the Firth area, we grade building sites, build driveways, and prep the ground for patios, parking areas, and landscaping.

Utility Trenching in the Firth area

We trench and install the lines a new home needs in the Firth area: power, fiber optic, water, and sewer. We also coordinate with well drillers on homes that are not on city water.

Land Clearing in the Firth area

Before a foundation can go in, the lot has to be open. We clear land in the Firth area for building sites and can move straight into the excavation.

Small Structure Demolition in the Firth area

We demolish small homes, barns, and sheds in the Firth area, and leave the site ready for new construction.

Retaining Wall Excavation in the Firth area

We do the excavation for retaining walls in the Firth area, laid out and prepped for the wall crew. Many walls in this area are concrete, and they start with good ground work.

Project Near Firth?

Tell us about your property. We will talk through the project and what comes next.

Call (208) 924-2813

Permits and Planning in the Firth area

On a new home in the Firth area, two sets of approvals matter. The building permit comes from the city or county, and the homeowner or the general contractor is responsible for it. If the home is not on city sewer, the septic system also has to be permitted through the local public health district, which for this area is Southeastern Idaho Public Health.

Our part starts with the test holes. We dig them for water elevation and ground conditions, the health district evaluates them and decides what kind of septic system the property needs, and the system goes in once it has been permitted. If you do not have your permit or your design yet, you can still talk to us. Building permits can take a few weeks, so it helps to start early.

How a New Home Build Goes in the Firth area

Most of our work is excavation for new homes, and in the Firth area that usually follows a familiar order. If the buyer has not purchased the land yet, we can do a pre-site walkthrough to talk about where the house and the well would best go. After the permits, the property is surveyed to mark the foundation points, we excavate, and the concrete crew pours the foundation. We then put in the underground utilities that run inside the foundation and backfill.

Once the house is going up, we bring in power for the other contractors, coordinate with the well driller or connect to city water, and connect to city sewer or install the septic system. The septic system usually goes in near the end so other trades do not drive over it. The last pieces are the driveway, if the owner wants one, and prep around the house for concrete, patios, or landscaping.

Work Done the Way It Should Be Done

Our owner, Justin Morgan, has run excavators since he was a teenager and spent about 15 years in the field with the Operating Engineers before returning to excavation full time in recent years. He is particular about how the work is done. The goal is that the owner gets exactly what they are after and that the work meets the requirements of the permits and inspections. If a job needs a little more time to get right, he would rather spend it.

Ground and Weather in the Firth area

Ground conditions and weather shape any dirt job. The soil, the water table, and the slope of a lot all vary from one property to the next, which is why test holes come early on a septic project instead of guesses. If your project in the Firth area has a target start date, tell us early so we can plan around the conditions on the ground. Before any digging, call 811 at least two business days ahead so underground utilities get marked, as Idaho law asks excavators to do.

Before You Contact Us About a Project in the Firth area

A little preparation helps us give you a useful answer quickly. When you reach out, it helps to have:

  • The address or parcel location of the property
  • Whether you are building a new home, replacing a septic system, or planning other dirt work
  • Whether the property is on city sewer and water, or on a septic system and a well
  • Whether you already have a building permit, an approved design, or a septic permit
  • Your target timeline

If you do not have all of that yet, that is fine. Tell us what you know and we will help you work out the next step. You can call (208) 924-2813 or send us a message through our contact form.

What Working with Us Looks Like

  1. Reach out. Tell us the address, what you are planning, and your timeline. You can call (208) 924-2813 or send us a message through our contact form.
  2. We talk it through. We answer your questions, and for a new home we can walk the property with you to talk about where the house and the well should go.
  3. Test holes for septic. If the property is not on city sewer, we dig test holes so the health district can evaluate the ground and decide what kind of system is needed.
  4. Permits. The homeowner or the general contractor gets the building permits, and the septic system is permitted through the health district.
  5. The dirt work. Once the survey and the permits are in place, we excavate the foundation, put in the utilities, and backfill.
  6. Septic or sewer, driveway, and finish prep. We connect the home to city sewer or install the septic system, build the driveway if you want one, and prep the area around the house.

Why Firth Customers Choose Spring Creek Builds

Septic and Excavation From One Crew

Most of our work is excavation for new homes, and septic systems are a big part of what we want to do. On a build that needs both, one crew can handle the foundation, the utilities, and the septic system.

Careful About the Details

We want the work to meet what the permits and inspections require, and to give the customer exactly what they are after. If a job needs more time to be done right, we take it.

We Work With Builders and Homeowners

We work with general contractors and developers on new construction, and we also take on projects for homeowners.

Serving Firth and All of Bingham County

Our work near Firth is part of a wider service area. We also serve Blackfoot, Shelley, and other communities in Bingham County, and the other eastern Idaho counties on our service area page. Not sure whether your property is in our area? Call (208) 924-2813 or send us a message through our contact form and we will let you know.

Frequently Asked Questions About Work Near Firth

Do you serve Firth, ID?

Yes. Firth is in Bingham County, one of the five eastern Idaho counties we serve.

Can you install a septic system near Firth?

Yes. A new system starts with test holes, which we dig. The local public health district, Southeastern Idaho Public Health, then evaluates the site and permits the system, and we install it.

Do you do new home excavation near Firth?

Yes. New home excavation is the work we do most in Bingham County, including the Firth area: foundations, utilities, septic or sewer connection, backfill, and driveways.

How do I get a quote for a project near Firth?

Send us a message through our contact form with the address and what you need. We will talk through your project.

Ready to Start Your Project in Firth?

Contact Spring Creek Builds today and let's look at your site.